intermartku

NEW YORK, March 26, 2026 

Today the textile industry confirms that dye sublimation cannot successfully print on 100 percent cotton fabric. This limitation forces apparel producers to rely on screen printing for natural cellulose fibers. This press release covers the material science separating these two apparel decoration methods. Unlike sublimation, screen printing does not require a chemical phase change.

Dye sublimation fails on cotton because natural cellulose fibers lack the synthetic polymers required to encapsulate disperse dyes. Solid disperse dyes convert directly into a gas phase under a commercial heat press operating at 400 degrees Fahrenheit. This gas transition requires synthetic polymers, like polyester, to trap the dye molecules as they cool. Cotton lacks these polymers. The dye gas escapes completely. According to clinical textile adhesion tests, disperse dyes register zero peel strength on untreated cotton. The mechanical structure of natural fibers rejects this chemical bonding process entirely.

Screen printing forces liquid ink through a porous stencil directly onto the fabric. Plastisol and liquid inks grip the porous cotton fibers and cure permanently under heat. Commercial printers coat a mesh screen with emulsion, expose it to ultraviolet light, and push ink through the unexposed pores using a squeegee. Plastisol requires a sustained curing temperature of 320 degrees Fahrenheit to bond the polymers. Natural cellulose readily accepts these liquid pigments. Manufacturers apply plastisol to dense materials because the ink sits entirely on top of the thick weave, creating a durable graphic layer.

Screen printing carries high initial setup costs but becomes highly inexpensive at scale. Sublimation maintains a flat cost per unit regardless of volume. Every new color in a screen print requires a separate film positive and screen coating. This labor makes printing a single shirt very expensive. Large runs of spun cotton rely entirely on screen printing to drop the price. Apparel brands must choose the correct process for their substrate.

source: https://www.linkedin.com/posts/canvasetc_printingsolutions-smallbusiness-printondemand-activity-7442961972872183810-4s8v/